SEI Industrial Chemicals Anti-Graffiti coating on 24,000 sq ft concrete sound walls

24,450 sq ft of precast concrete sound walls

The City of Sparks, a neighboring city to Reno, NV, utilized SEI Chemical’s anti-graffiti coating technology to protect 24,450FT2 of precast concrete sound walls in September, 2012. The project consisted of (4) individual walls, which would all receive an oxidizing stain treatment before being protected with (1) coat of SEI Sealer Prime followed by (1) coat of GPA-300 Graffiti Proofer®.

Josh Thompson, Civil Engineer for Atkins Global, headed up the project design. The City of Sparks requested Mr. Thompson spec the Graffiti Proofer as the anti-graffiti coating of choice for this project. As a sole-source specification could not be permitted, Mr. Thompson included the following:

Anti-Graffiti Coating shall be Seicoat Graffiti Proofer GPA-300 per NDOT QPL requirements, or approved equal. Alternate submittals will not be considered without meeting the following minimum requirements:

• Graffiti removal by wiping with a dry cloth or with light pressure washing. No release or
cleaning agents required.
• Non-sacrificial, non-yellowing and clear
• Allows expansion and contraction
• Meets the performance requirements of ASTM D6578, Level 10
• Included on Nevada Department of Transportation’s current Qualified Products List

All alternate product submissions ultimately fell short of the requirements and were not approved. The application of the Graffiti Proofer to the Vista sound walls provides the City of Sparks with the largest surface area, in Nevada, which allows graffiti to be removed without using chemicals.
For more information please call (408) 402-5395 or email

2 more water tanks protected with graffiti resistant coating by SEI Industrial Chemicals

Lower 2 rungs protected with Graffiti Proofer

Water tanks are one of the premier targets for graffiti “tagging” with spray paint, stickers and markers. Due to their vast size and the remote location that most water tanks are located, it is a tempting spot for taggers to hang out and perform their “art without permission”. SEI Industrial Chemicals Graffiti Proofer coating is a clear-coat that is applied to the surface and will last for years and many removals… making it the best choice for long term protection. When the substrate does get “tagged” with graffiti, no chemicals are needed to remove most spray paints, stickers and markers. Simply use water and a rag or a low pressure wash with water only.
For more information please call (408) 402-5395 or email

Concrete “Mural” Arches protected by SEI Industrial Chemicals of California

Helping protect artwork

The entrance for many communities and city centers are frequently highlighted with arches, signage or columns. These high traffic areas and commonly subjected to foot prints, gum, graffiti stickers, spray paint and environmental contaminants. To help preserve the structure along with the artwork, many property owners, managers and municipalities turn to SEI Industrial Chemicals in California to supply a long-term solution to helping preserve and protect their assets. For more information please call (408) 402-5395 or email
Prints removed with water and a rag:

Permanent Graffiti Resistant Coating on Wood, Concrete and Stucco Surfaces- SEI Industrial Chemicals

There are many anti-graffiti coatings available in the marketplace, but once you weed out the sacrificial coatings (lasting only one or a couple of removals) and those that can only adhere to metal or painted substrates, then the field gets less crowded.
If you were to continue with your “wish list” for long-term graffiti protection by adding that the product needs to be low VOC, clear in color, only one component so you do have to mix chemicals together and versatile enough to adhere to many surface types… you’d be gravitating toward SEI Industrial Chemicals Graffiti Proofer.
Just for fun, you should add that the product have excellent non-stick characteristics so those pesky graffiti stickers (a.k.a. “slap tags”) don’t adhere to your surface. While you are at it, why not add to the list that the product should allow you to remove graffiti spray paint, graffiti permanent maker, bubble gum, lipstick and many other types of graffiti by simply wiping it off with a damp towel or using a low pressure wash with no chemicals.
No, this is not fiction! SEI Industrial Chemicals has provided the Graffiti Proofer to many municipalities, property owners/managers, contractors and professionals for years to cover valuable assets like- split face block and cement block sound walls, stucco buildings, brick walls, metal signs and bridges, vinyl wrapped utility boxes, metal painted doors, wood fences, water tanks, fountains, rocks, plastic fire alarm pull covers, newsstands, murals and many more surfaces.
For more information please call (408) 402-5395 or email
Take a look at the Graffiti Proofer in action.

When Powder Coating Still Isn’t Enough Graffiti Resistance- SEI Industrial Chemicals

Parks & Rec ornamental gates

Many metal painted surfaces are “powder coated” which is typically used to create a hard finish that is tougher than conventional paint. Metal park benches, newspaper stands and painted metal gates are just a few examples. The disappointing thing about a powder coated surface is that it is usually subjected to spray paint graffiti, permanent markers and graffiti stickers (a.k.a. “Slap Tags”) and other forms of graffiti. Once “tagged”, minimal to moderate success at removing graffiti is achieved. Even more frustrating is that, by the nature of design, powder coatings can be very difficult to apply a “top coat” anti-graffiti product over.

The SEI Graffiti Proofer single component non-sacrificial graffiti resistant coating has experienced much success over a myriad of powder coated surfaces like the attached ornamental gates.
For more information please call (408) 402-5395 or email

This video illustrates graffiti removals of graffiti spray paint and graffiti stickers from a powder coated newsstand and window that has been protected with the Graffiti Proofer by SEI Industrial Chemicals applicators.

What happens when you accidentally paint over SEI Industrial Chem.- Graffiti Proofer?

This structure was subjected to constant graffiti tags and was painted over every few days.

Before Graffiti Proofer coating

It has been cleaned and coated with SEI Industrial Chemicals Graffiti Proofer.

After Graffiti Proofer application of clear coat

So, what happens when you accidentally paint over SEI’s Graffiti Proofer? Watch the video… it is worth the time. For more information please call (408) 402-5395 or email

Pedestrian Tunnel has anti-graffiti coating by SEI Industrial Chemicals

High School students spent weeks painting this mural… luckily it is protected.


SEI Industrial Chemicals anti-graffiti coating is applied to this aquatic mural to provide repeated protection by sealing the surface from many spray paints, permanent markers, lipstick, paint pens, crayons, gum, footprints, grease and other commonly used tools of the graffiti vandal. The treated surfaces are also protected from the harmful effects of the environment (smog, ultra-violet rays, sulfur dioxide, smoke, ozone, dirt, wind, sea mist and spray, and other common urban pollutants). Graffiti can be removed multiple times without using any chemicals. For more information please call (408) 402-5395 or email

Water tank and aluminum dome protected from graffiti since 2010

Tank and Dome protected since 2010

Water tanks are prime targets for graffiti due to their locations and vast surfaces. in 2010, SEI Industrial Chemicals in California provided the Graffiti Proofer clear coat to help protect the tank and dome for years against spray paint and permanent markers. This tank was put back into service in 2010 and has been protected ever since. The anti-graffiti coating was applied to the painted concrete tank walls and the entire aluminum dome. Seicoat’s Graffiti Proofer sticks to a host of non-porous and porous substrates such as: metal, wood, concrete split face block, CMU and painted surfaces. For more information contact us at:

SEI Industrial Chemicals anti-graffiti coating on stucco building for long term protection

In California, stucco is a commonly used construction material that is assaulted daily by a variety of Environmental Contaminants, Weather and Frequent Damage by Graffiti Vandals. SEI Industrial Chemicals in California specializes in protecting and removing graffiti from stucco surfaces. Here is another recent example of a stucco surfaced structure being protected for years to come against environmental contaminants, bubble gum, grease, foot prints, spray paint, stickers, crayons, markers and wax. To find out more, call (408) 402-5395 or email

Graffiti tags easily removed from metal newsstand in less than 90 seconds

Graffiti tags easily removed from metal newsstand in less than 90 secondsOne of the most heavily hits surfaces are newspaper stands in cities. There is a constant battle against the unwanted marks and a never ending problem. Additionally, many municipalities have ordinances in place requiring quick removal of graffiti or the vendor faces fines.  This SF Weekly newsstand is protected with SEI Industrial Chemicals anti-graffiti coating.  The video illustrates removals of slap tags and spray paint all in around 90 seconds.  Additionally, the protective clear coat is still in place and will survive foot prints, gum, tape, labels, spilled beverages, spray paints, markers, crayons and many other items.